UltimateAVmag.com: See-Through Speakers

I'm always casting about for interesting high-end products to feature in this blog, so I suppose it was inevitable that I would eventually find the FH001 speaker from a British company called Ferguson Hill. As soon as I saw a photo of this intriguing design, I knew I had to profile it here.

As you can plainly see, the FH001 is a horn speaker made of clear acrylic. Horns are among the oldest speaker designs because they are incredibly efficient, and they also extend the low-frequency range of the driver. As a result, the FH001 boasts an efficiency of 100dB/W/m and needs only 3 to 50 watts of amp power, making it ideal for tube-based power amps so beloved by many audiophiles. And its frequency range is an astounding 150Hz-20kHz (±5dB) with no crossover.

The shape of the FH001's horn was designed to maintain a uniform expansion of the sound wavefront from the circular driver to the oval mouth while minimizing vibrational modes and making the low-frequency rolloff less steep than it would be with a circular mouth. But why acrylic? According to the company, this material exhibits great damping and toughness for its strength-to-weight ratio, and it can be readily formed into complex shapes with compound curves. And the fact that it's clear is way cool!

The driver is a modified Lowther DX3 fitted with a precision-machined aluminum-alloy phase plug designed to produce the best frequency response with the shape of the horn. Lowther's claim to fame is its rare-earth magnet technology that is said to dramatically increase acceleration and damping factors, resulting in exceptional transient response. In this case, the driver is open at the back, preventing the backwave interactions that occur in a cabinet.

Because the FH001's lower limit is 150Hz, a separate bass speaker is required for full-range sound. Enter the FH002, an acrylic sphere 24 inches in diameter with a 12-inch cone driver. The enclosure has six small holes behind the driver, which provide a resistive element to improve power handling without the resonant frequency of a normal port. The in-room measured response is -3dB at 40Hz and -6dB at 35Hz. (Obviously, this still doesn't provide "full-range" sound, which requires another octave below 40Hz.)

To power a pair of FH002s, Ferguson Hill offers a dedicated bass amp dubbed—you guessed it—the FH003. This 2-channel, Class B, solid-state amp provides 100 watts per channel into 4Ω. Normally, the FH003 would be fed from a full-range preamp, and its active crossover rolls off above 150Hz at 12dB/octave.

A complete 2-channel system with two FH001s, two FH002s, and one FH003 carries a price tag of just over $26,000 at the exchange rate from British pounds to US dollars as of this writing. But the coolness factor alone is easily worth that much!

< Previous Post | Blog Home | Next Post >

Reader Comments

Posted Mon Jun 8, 2009, 2:59 PM — By Fred

This is clearly a transparent attempt at horning in on an avante-garde marketplace.

Posted Wed Jun10, 2009, 8:14 PM — By Joe Dokes

Is this a joke? This would have looked really cool in 1978 or so. Perhaps if you have a 10,000 square foot loft and are looking for a retro 70s style look these speakers may be just for you, or perhaps they are ripping off Apple speakers from the mid 90s. Either way, the are both hideously ugly and hideously over priced. Regards Joe Dokes

Posted Wed Jun10, 2009, 9:07 PM — By Dave J

These Ferguson Hill speakers look mighty weird. I find it interesting that horns are getting lots of consideration these days. But, I'd like to hear these at some point (that is...if they come to an audio store in my area).

Posted Thu Jun11, 2009, 2:27 AM — By Kenny

Would be good at the science fair. The price is laughable...NOT that hard to calculate or make. I diy Tlines for folks because they can be hidden. Who wants to come home to elephant ears... t

Posted Mon Jun15, 2009, 3:53 AM — By Jarod

Wow, that has to be the funniest looking sub enclosure I have ever seen! It looks like a see-thru piggy bank!

Posted Thu Jun18, 2009, 11:40 AM — By Joe Dokes

Jarod wins the thread!!! Piggy Bank, good call. Regards Joe Dokes

Posted Sun Jun21, 2009, 9:35 AM — By Tim

The Ferguson Hill big speaker system is expensive, but they also do a desktop version that's much more affordable, based on the High End technology. http://www.fergusonhill.co.uk/product_details.php?id=7 Check out the reviews: http://www.fergusonhill.co.uk/reviews.php The FH007 mini system comes top in a group review of multi media speakers !

Posted Mon Jun22, 2009, 3:23 PM — By beep

AFAIK they are no longer distributed in the US, allegedly due to empty boxes. A case of truly invisible speakers.

Posted Tue Oct27, 2009, 10:54 AM — By mike

I made a very simple set of speakers that use the Lowtther dx3 drivers and they sound great. I can only imagine the sound these make with the driver tuned to the horn. As for cost they are in the ballpark with all the other companies using Lowther drivers. The piggy bank does have to go!

Add Comment